Drain Plugs, Metal

IBDRV-2M

M25x1,5 / TL=15,0mm / SW=20mm

Drain Plugs
GOST
GOST | 
  • Drains condensed water in the housing.
  • Helps to avoid any potential damage to sensitive electric/electronic equipment in the housing due to condensed water.
  • Also allows air in the housing to breathe with the surrounding atmosphere.
  • Ideally it should be located at the lowest point of the housing to ensure optimum draining.
 
Products specifications
Material Body Brass, Brass Nickel Plated, Stainless Steel
Bushing Bronze
O-Ring Silicone
Ingress Protection Rating
IP 68 - 5 Bar, 30 min
IP 66
Operating Temperature
Seal Material
Silicone
-60°C to +85°C
Thread Type
Metric (M) EN 60423
NPT (N) ANSI ASME B1.20.1
Accessories Lock nuts
Gaskets ( Washers )
Remarks We recommend the use of lock nuts and gaskets to ensure IP rating for -
rough surfaces or through holes.
Accessories must be ordered separately.
O-ring available in Metric outer threads.
Outer Thread Size (Male) M25x1,5
Thread Length (TL) 15,0 mm
Ø (D) 33,0 mm
Spanner Width 30 mm
Height (h) 16,0 mm
Part Number IBDRV-2M
Order Coding
Part Number
Mandatory
Material
Mandatory
Seal
Mandatory
Lock Nut
Option
See table
B Brass
BN Brass Nickel plated
X Stainless steel
S Silicone
L Lock nut
Example
IBDRV-1M BN S L