M25x1,5 / B=6,0mm TL=10,0mm

ATEX

IMQ 13 ATEX 010X | EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-7:2015, EN 60079-31:2014

IECEx

IECEx IMQ 13.0003X | IEC 60079-0:2011 ; IEC 60079-7:2006-07 ; IEC 60079-31:2013

TR RU

No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013

IN METRO

DNV 18.0150 X | ABNT NBR IEC 60079-0:2013, ABNT NBR IEC 60079-7:2008 ABNT NBR IEC 60079-31:2011

MARINE APPROVAL

TAE00003WV | IEC/EN60079-0, IEC/EN60079-7, IEC/EN60079-31 IEC/EN 62444

Products specifications

Material	Body , Cap	PA 6 (Polyamide 6)
	Seal	CR ( Chloroprene )
Ingress Protection Rating
		IP 68 - 5 Bar, 30 min
		IP 66
Operating Temperature		Seal Material
		CR (Chloroprene)	Silicone
		-40°C to +70°C	-60°C to +70°C
Equipment For
		Gas & Dust potentially explosive atmospheres
		Cable glands should be also used for intrinsically safe circuits Ex-i.
Suitable for use in
		Group II Gas Group IIC ZONE1/ZONE2
		Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
		Ex II 2GD
		Ex eb IIC Gb Ex tb IIIC Db
Marking Example *
		BMD HIBM-X2.. CE 0722 II 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68
		Ta-60°C to +70°C IECEx IMQ 13.0003X IMQ 13 ATEX 010X
Impact Test Result		7J
Thread Type
		Metric (M) ISO Pitch 1,5
		Other thread types also available upon request.
Cable Type		Non Armoured, Non Circular, Heat Trace
Accessories		Lock nuts
		Gaskets ( Washers )
		Dust Plugs
Remarks		We recommend the use of lock nuts and gaskets to ensure IP rating for -
		rough surfaces or through holes.
		Accessories must be ordered separately.
Outer	Thread Size (Male)	M25x1,5
	Thread Length (TL)	10,0 mm
	Ø (D)	32,5 mm
Flat Hole	Height B	6,0 mm
	Width A	10,8 mm
Spanner Width	Cap	29 mm
	Body	29 mm
max. Height (H)		37,7 mm
Part Number		HIBMI-XEU25 (10,8x6,0)

Order Coding
Part Number Mandatory	Seal Mandatory	Gasket (Washer) Option	Lock Nut Option
See table *Part number for blue cap is HIBMI-..	C Chloroprene S Silicone	WC Chloroprene WS Silicone WF Fiber	L Lock nut
Example
HIBMI-XEU25 (10,8x6,0)	C	WC	L
* HIBMI-X5 (10,8x6,0)

Lock Nuts