M25x1,5 / 10,0 - 18,0mm / TL=8,0mm

EMC Servo Ampacity cable glands with high current proof, open moving spring contact

VDE

40039349

UL

E199260

GOST

GOST |

• For metal machines and housings.
• Vibration proof EMC performance.
• For high current proof applications.
• Specially designed EMC protective cable glands.
• Long-lasting contact by high definition contact spring.
• Moving spring contact offers reduced risk of sheath damage.
• Easy movement of cable as long as not fastened.
• Easy assembly: install cable gland - prepare cable sheath - insert cable - tighten cap.
• Easy assembly and disassembly of cable. Spring closes and opens according to fastening of the cap.
• High quality strain relief and sealing, reliable performance for EMC applications.
• Up-to-date international approvals

Products specifications

Material	Body , Cap	Nickel plated Brass, Stainless Steel
	Seal	CR ( Chloroprene )
	Clamping Insert	PA 6 (Polyamide 6)
	Contact Spring	Special Copper Alloy
	O-Ring	NBR
Ingress Protection Rating		IP 68 - 5 Bar, 30 min
Flammability		V2 according to UL94
Operating Temperature		Permanent	Intermittent
		-20 °C to +100 °C	-40 °C to +150 °C
Thread Type
		Metric EN 60423
		NPT ANSI B1.20.1
Cable Type		Shielded
Accessories		EMC Lock nuts
		Dome plugs
		Gaskets ( Washers )
Remarks		In compliance with DIN EN 62444.
		We recommend the use of lock nuts and gaskets to ensure IP rating for -
		rough surfaces or through holes.
		Some approvals do not cover all sizes.
		O-ring is available in Metric thread as a standard. For NPT-
		threads O-ring available upon request.
		Accessories must be ordered separately.
		Other lock nut types also available upon request.
Outer	Thread Size (Male)	M25x1,5
	Thread Length (TL)	8,0 mm
	Ø (D)	33,0 mm
Clamping Range Outer Sheath Ø min - max		10,0 - 18,0 mm
Shield Diameter Ø min-max		7,0 - 14,0 mm
Spanner Width	Cap	30 mm
	Body	30 mm
max. Height (H)		52,0 mm
Part Number		BMEM-53