Material |
Body , Cap |
PA 6 (Polyamide 6) |
Seal |
Silicone |
Ingress Protection Rating |
IP 68 - 5 Bar, 30 min |
IP 66 |
Operating Temperature |
Seal Material |
Silicone |
-60°C to +70°C |
Equipment For |
Gas & Dust potentially explosive atmospheres |
Cable glands should be also used for intrinsically safe circuits Ex-i. |
These cable glands shall have a light blue colored cap. The symbol " I " will - |
be added beside of the "HIBM" for order processing. |
Suitable for use in |
Group II Gas Group IIC ZONE1/ZONE2 |
Group III Dust Group IIIC ZONE21/ZONE 22 |
Equipment Marking |
Ex II 2GD |
Ex eb IIC Gb Ex tb IIIC Db |
Marking Example * |
BMD HIBM-X2.. CE 0722 II 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68
|
Ta-60°C to +70°C IECEx IMQ 13.0003X IMQ 13 ATEX 010X |
Impact Test Result |
7J |
Thread Type |
Metric (M) ISO Pitch 1,5 |
Other thread types also available upon request. |
Cable Type |
Non Armoured, Non Circular, Heat Trace |
Accessories |
Lock nuts |
Gaskets ( Washers ) |
Dust Plugs |
Remarks |
We recommend the use of locknuts and gaskets to ensure IP rating for rough |
surfaces or through holes. |
Accessories must be ordered separately. |
Outer |
Thread Size (Male) |
M25x1,5 |
Thread Length (TL) |
10,0 mm |
Ø (D) |
32,5 mm |
Flat Hole |
Height B |
5,0 mm |
Width A |
12,8 mm |
Spanner Width |
Cap |
29 mm |
Body |
29 mm |
max. Height (H) |
37,7 mm |
Part Number |
HIBM-XEU25 (12,8x5,0) |