NPT 3/4" / 12,0 - 17,0mm / TL=12,0mm

Cable glands for hygienic requirements

UL and Type 4X

E199260 | UL514B, CSA22.2 No 18.3-12, CSA22.2 No 94.2-1S

UL50E

EHEDG

| In progress.

MARINE APPROVAL

| TAE00003WY | EN62444

NSF/00

NSF1 | NSF/ANSI 169

NSF2 | NSF/ANSI/3-A 14159-1

GOST

GOST |

• For applications in manufacturing and packaging of food and pharmaceuticals, clean room technology, biotechnology, chemical industry.
• Smooth finish prevents harmful micro organisms to stick to the surface.
• No threads are exposed.
• Gasket material according to FDA guideline 21 CFR 177.2600.
• Cleaning of cable glands is easier, faster and less expensive.
• Reliable strain relief due to strain relief element separated from grommet.
• Suitable for high pressure steam cleaning.
• Lock nut included.

Products specifications

Material	Body and Cap	Stainless Steel 1.4305(AISI 303)
	Lock Nut	Stainless Steel 1.4305(AISI 303)
	Seal	EPDM, according to FDA guideline 21 CFR 177.2600
Ingress Protection Rating
		IP 68 - 5 Bar, 30 min
		IP 69
		IP 66
UL Environmental Rating		TYPE 1, 2 , 4 , 4X, 12, 12K, 13 acc. to UL 50E
Operating Temperature		Permanent	Intermittent
		-20 °C to +100 °C	-40 °C to +150 °C
Cable Type		Non Armoured
Thread Type
		Metric EN 60423
		NPT ANSI B1.20.1
Accessories		Hygienic cable gland adapters
		Special tools
Remarks		Manufactured according to DIN EN 62444/50262.
		We recommend the use of lock nuts to ensure IP rating for rough surfaces -
		or through holes.
		Accessories must be ordered separately.
		For assembly from outside only, special tool is available on request.
		Other steel grades on request.
Outer	Thread Size (Male)	NPT 3/4"
	Thread Length (TL)	12,0 mm
	Ø (D)	38,0
Clamping Range Outer Sheath Ø min - max		12,0 - 17,0 mm
Spanner Width	Cap	35 mm
	Bottom	17 mm
	Lock Nut	35
Inner Ø (ID)		17,3 mm
max. Height (H)		33,5 mm
Part Number		BNHG1-03-L

NPT 3/4" / 12,0 - 17,0mm / TL=12,0mm

Lock Nuts

Dome Plugs

Hygienic Cable Gland Adapters