M25x1,5 / B=6,0mm / TL=10,0mm

ATEX

IMQ 13 ATEX 011X | EN 60079-0:2009; EN 60079-7:2007; EN 60079-31:2009.The compliance of the equipment is not influenced by the modification introduced by harmonized standards ; EN 60079-0:2012+A11:2013, EN 60079-7:2015, EN 60079-31:2014.

IECEx

IECEx IMQ 13.0004X | IEC 60079-0:2007-10 ; IEC 60079-7:2006-07 ; IEC 60079-31:2008

TR RU

No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013

MARINE APPROVAL

TAE00003WV | IEC/EN60079-0, IEC/EN60079-7, IEC/EN60079-31 IEC/EN 62444

Products specifications

Material	Body , Cap	PA 6 (Polyamide 6)
	Seal	CR (Chloroprene) , Silicone
Ingress Protection Rating
		IP 68 - 5 Bar, 30 min
		IP 66
Operating Temperature		Seal Material
		CR (Chloroprene)	Silicone
Ex-i		-40°C to +70°C	-60°C to +70°C
Equipment For
		Gas & Dust potentially explosive atmospheres
		Cable glands should be also used for intrinsically safe circuits Ex-i.
Suitable for use in
		Group II Gas Group IIC ZONE1/ZONE2
		Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
		Ex II 2GD
		Ex eb IIC Gb / Ex tb IIIC Db
Marking Example *
		BMD BM-X2.. CE 0722 II 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68
		Ta-40°C to +80°C IMQ 13 ATEX 011X IECEx IMQ 13.0004X
Impact Test Result		4J
Thread Type
		Metric (M) ISO Pitch 1,5
		Other thread types also available upon request.
Cable Type		Non Armoured, Non Circular, Heat Trace
Accessories		Lock nuts
		Gaskets ( Washers )
		Dust Plugs
Remarks		We recommend the use of lock nuts and gaskets to ensure IP rating for -
		rough surfaces or through holes.
		Accessories must be ordered separately.
Outer	Thread Size (Male)	M25x1,5
	Thread Length (TL)	10,0 mm
	Ø (D)	30,9 mm
Flat Hole	Height B	6,0 mm
	Width A	10,8 mm
Spanner Width	Cap	24 mm
	Body	27 mm
max. Height (H)		32,4 mm
Part Number		BMI-XSX5 (10,8x6,0)

Order Coding
Part Number Mandatory	Seal Mandatory	Gasket (Washer) Option	Lock Nut Option
See table *Part number for blue cap is BMI-..	C Chloroprene S Silicone	WC Chloroprene WS Silicone WF Fiber	L Lock nut
Example
BMI-XSX5 (10,8x6,0)	C	WC	L
* BMI-X2L (10,8x6,0)

M25x1,5 / B=6,0mm / TL=10,0mm

Lock Nuts

Gaskets