M40x1,5 / 18,0-25,0mm / TL=9,0mm

Stainless steel cable glands with lamellar clamping

VDE

VDE_40040034 | DIN EN 62444

UL and Type 4X

E199260 | UL514B, CSA22.2 No 18.3-12, CSA22.2 No 94.2-15

UL50E

MARINE APPROVAL

TAE00003WY | EN62444

GOST

GOST |

• For high quality machines and housings.
• For high quality applications in corrosive environments.
• Applications: Outdoor, food industry, pharmazeutical industry and other sensitive applications.
• Easy assembly: install cable gland - insert cable - tighten cap.
• High quality strain relief and sealing, reliable performance for standard industrial applications.
• Up-to-date international approvals.

Products specifications

Material	Body , Cap	Stainless steel 1.4305 (AISI 303)
	Seal	CR ( Chloroprene )
	Clamping Insert	PA 6 (Polyamide 6)
	O-Ring	NBR
Ingress Protection Rating		IP 68 - 5 Bar, 30 min
Flammability		V2 according to UL94
Operating Temperature		Permanent	Intermittent
		-20 °C to +100 °C	-40 °C to +150 °C
Thread Type
		Metric EN 60423
		PG DIN 40430
		NPT ANSI B1.20.1
		Other thread types also available upon request.
Cable Type		Non Armoured
Accessories		Lock nuts
		Dome plugs
		Reducing seals
		Flat cable seals
		Multihole seals
		Gaskets ( Washers )
Remarks		Different sealing types available.
		In compliance with DIN EN 62444.
		We recommend the use of lock nuts and gaskets to ensure IP rating for -
		rough surfaces or through holes.
		Some approvals do not cover all sizes.
		Accessories must be ordered separately.
		Some approvals do not cover all sizes.
		O-ring available in Metric and PG threads as a standard. For NPT -
		threads O-ring available upon request.
		Note: Applications of most cable glands don't require same parameters -
		applied to tests. For applications strictly acc. to the approval definitions -
		please consult data sheet.
Outer	Thread Size (Male)	M40x1,5
	Thread Length (TL)	9,0 mm
	Ø (D)	51,4 mm
Clamping Range Outer Sheath Ø min - max		18,0 - 25,0 mm
Spanner Width	Cap	41 mm
	Body	46 mm
max. Height (H)		40,5 mm
Part Number		BMSC-05

Order Coding
Part Number Mandatory	Gasket (Washer) Option	Lock Nut Option	Sealing Plug Option
See table	WC Chloroprene WS Silicone	L Lock nut	P Dome Plug T Dust Plug
Example
BMSC-05	WC	L	P

M40x1,5 / 18,0-25,0mm / TL=9,0mm

Lock Nuts

Dome Plugs

Reducing Seals

Flat Cable Seals

Multihole Seals

Gaskets