M12x1,5 / bar=0,5 / TL=10,0mm

Ventilation Plugs

ATEX

IMQ 13 ATEX 030X | EN 60079-0:2012+A11:2013, EN 60079-7:2015, EN 60079-31:2014

IECEx

IECEx IMQ 14.0003X | EN 60079-0:2012+A11:2013, EN 60079-7:2015, EN 60079-31:2014

TR RU

No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013

GOST

GOST |

• Balances pressure differences between inside and outside of enclosure.
• Prevents damages, such as condensation due to pressure differences.
• Membrane properties: hydrophobic, oleophobic.

Products specifications

Material	Body , Cap	Stainless Steel 316L
	Vent. Membran	Acrylic co-polymer on nylon-support
	O-Ring	CR (Chloroprene)
Ingress Protection Rating		IP 66 (EN 60529)
Operating Temperature
		Seal Material
		CR (Chloroprene)
		Ex e/tb
		-40 °C to +100 °C
Equipment For		Gas & Dust potentially explosive atmospheres
Suitable for use in
		Group II Gas Group IIC ZONE1/ZONE2
		Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
		Ex II 2GD
		Ex e IIC Gb Ex t IIIC Db
Marking Example *		RST DAE... 0637 $ II 2G Ex e IIC Gb Ex II 2D Ex t IIIC Db IBExU 10 ATEX 1169 U
Type Protection		Ex e ; Ex t
Thread Type		Metric (M) ISO Pitch 1,5
Remarks		O-ring available in Metric outer threads.
Outer	Thread Size (Male)	M12x1,5
	Thread Length (TL)	10,0 mm
	Ø (D)	18,8 mm
Average Air Flow for ΔP = 70 mbar/1 psi (l/h)		25
Water Intrusion Pressure (mbar)		0,5 bar
Spanner Width		17 mm
Height (h)		11,0 mm
Part Number		MBBVP-X01L